Apply Pasand Eco-Release Emulsion 1:5 water diluted solution to the face of the formwork by spray, roller brush or cloth. Only one coat should be applied, as thinly as possible except on very absorbent new timber where two coasts may be necessary for first application only. Allow the coating to dry.

If the formwork is not used for several days, a further coat may be applied before use.

Drying time: It is essential that Pasand Eco-Release Emulsion is thoroughly dry before placing concrete. In condition of high humidity drying times will be much longer than in warm dry conditions.

Rainfall: It is necessary to protect freshly coated formwork from rain, which may dilute the emulsion before it has dried. After drying the coating will withstand an occasional light shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly.

Before re-use of formwork: The cleaned formwork surfaces must be re-coated with Pasand Emulsion each time as per normal practice.