Pasand Eco-Release Aluminium should be applied using roller brush or lightweight horticultural sprayer (knapsack type).
Only one coat should be applied, as thinly as possible,except on very absorbent new timber where two coasts may be necessary for first application only. If the form work is not used for several days, a further coat may be applied before use.
Drying time: It is essential that Pasand Eco-Release is thoroughly dry before placing concrete. Otherwise, its performance may be impaired. In condition of high humidity drying times may be much longer than warm dry conditions.
Rainfall: It is necessary to protect freshly coated form work from rain, which may dilute the product before it has dried. After drying the coating will withstand an occasional light shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly.
Before re-use of form work: The cleaned form work surfaces must be re-coated with Pasand Eco-Release each time as per normal practice.