Shuttering Oil - PASAND ECO-RELEASE ALUMINUM

Vegetable oil based, ready to use,mould release agent

Pasand Eco-Release Aluminium is used for easy, stain free release of concrete moulds and form work of all types including Aluminium, wooden and steel.

Pasand Eco-Release Aluminium is ready-to-use, vegetable oil based form release agent supplied as amber brownish liquid. It forms a thin film on the surface of the form work, which enables easy stripping from the hardened concrete to produce smooth uniform finish with reduced incidence of blow holes.

Features And Benefits

  • Versatile: can be used for all concrete formworks including aluminium, wooden and steel
  • Ready to use: ensures fast, clean stripping of forms
  • Non-staining: delivers stain-free finish
  • Eco-friendly: vegetable oil based, bio-degradable

Application

Apply Eco-Release Aluminium before the first casting and thereafter re-apply immediately after stripping and cleaning the mould.

New moulds: No preparation is normally necessary. Metal moulds showing signs of rust must be wire brushed and cleaned before application. New Woodwork: Untreated timber and Plywood may require a second coat for first application only. Treated woodwork should require just a single coat.

MRO---WO

Specifications

Appearance:Clear Amber Liquid
Flash point:Non - Flammable
Density:
0.95 – 0.99 at 27°C
Viscosity:
15 – 25 sec at 27°C (B4 cup)
   
   

Coverage

Pasand Eco-Release Aluminium covers 20–50m2/ltr depending on the smoothness and porosity of the form work.

Packing

Pasand Eco-Release Emulsion is packaged in 200 litre HDPE drums.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.

How to Use

Pasand Eco-Release Aluminium should be applied using roller brush or lightweight horticultural sprayer (knapsack type).

Only one coat should be applied, as thinly as possible,except on very absorbent new timber where two coasts may be necessary for first application only. If the form work is not used for several days, a further coat may be applied before use.

Drying time: It is essential that Pasand Eco-Release is thoroughly dry before placing concrete. Otherwise, its performance may be impaired. In condition of high humidity drying times may be much longer than warm dry conditions.

Rainfall: It is necessary to protect freshly coated form work from rain, which may dilute the product before it has dried. After drying the coating will withstand an occasional light shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly.

Before re-use of form work: The cleaned form work surfaces must be re-coated with Pasand Eco-Release each time as per normal practice.