Wire Drawing Soap – PasandTM WDS100


PasandTM WSD100 is high performance soap that assistsing good surface finish and long die life.It is effective in high speed and deep drawing application of metals and provides optimum film strength, lubricity and good metal wetting characteristics.


There are a number of factors which have a considerable effect on the drawing process including composition of the metal to be drawn, Percentage reduction, Machine design and constraints, drafting practices, drawing speed, die design, Surface condition of rod and carriers.


Oxides need to be removed prior to wire drawing process to ensure optimal results. When wire rod is produced, oxides are formed on the surface of the wire. Fe3O4 is a blue oxide that forms on the wire as it cools following the rolling process and Fe2O3 is the red surface oxide or rust that forms during shipping and storage.

Features And Benefits

  • It provides excellent surface finish and dimensional control.
  • It has good cooling and flushing properties.

Application

PasandTM WSD100 is used in several applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.

Specifications

Appearance : Brown Paste
pH Value : 8 - 9
Specific Gravity : 1.00-1.05
Solubility in Water : Completely soluble
Active Matter : 45 - 50 %
Shelf Life : 6 Months


 

Packing

PasandTM WDS100 is packaged in 50 Kg and 200 Kg drums. Private labelling and customised packing is also available on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.



Save