Spotting Fluid (Weighted) - PasandTM SPOT100


PasandTM SPOT100 is a special liquid blend of surface active agent, emulsifier, surfactant, and wall cake cracking material. It cracks the filter cake allowing it to penetrate, reducing the force required to free the stuck pipe. Spotting Fluid is also known as Pipe Free or Stuck Pipe Agent.

Features and Benefits

  • It does not require high shear and long mixing time.
  • It is compatible with common drilling fluid weighting agents.
  • It may be used in diesel oil, crude or low toxicity oil.
  • It allows quick and effective operation in case of stuck pipe problems.
  • It lubricates the wall.
  • It penetrates and dehydrates the wall cake
  • It improves lubricity reduces contact between the pipe and wall.

Application

It is used to release differential stuck pipe in an easy and effective manner. It dehydrates wall cake, allowing penetration of the spotting fluid and wetting of the drill string. Also reduces the forces of cohesion between the pipe and cake.

Specifications

Physical State : Blackish brown oily liquid
Specific Gravity : 0.97 – 1.0
Miscibility : Miscible in water and partially in HSD
pH Value : 7 – 8
Flash Point :   More than 100°C
Toxicity : Non-Toxic


 

Packing

PasandTM SPOT100 is packaged in 200 litre or 208 litre HDPE drums. Private labelling and customised packing is also available on request.


Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.


 

Spotting Fluid (Non-Weighted) - PasandTM SPOT200


PasandTM SPOT200 is a liquid containing long chain fatty acid compound blend of surface active agent, surfactant and wall cake cracking material formulated to serve as water in oil emulsifier and oil wetting agents.Spotting Fluid is also known as Pipe Free or Stuck Pipe Agent. It is stable at continuous temperatures more than145°C.

Features and Benefits

  • It allows quick and effective operation in case of stuck pipe problems.
  • It is Thermally Stable.
  • It penetrates and dehydrates the wall cake.
  • It is compatible with fresh and salt water Drilling Fluids and can be added in active mud system without adversely affecting other properties.
  • It improves lubricity, reducing contact between the pipe and wall.
  • It reduces down time due to stuck pipe.

Application

It is used to release differential stuck pipe in an easy and effective manner. Approximately 1-2 gallon should be added to each barrel of Diesel or Crude Oil that is required to cover the Zone of Stuck Pipe.

Specifications

Physical State : Blackish brown oily liquid
Specific Gravity : 0.91 – 0.93
Miscibility : Completely miscible in diesel
pH Value : 7 – 8
Flash Point :   More than 110°C


 

Packing

PasandTM SPOT200 is packaged in 200 litre or 208 litre HDPE drums. Private labelling and customised packing is also available on request.


Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.


 

Spotting Fluid (ENV) - PasandTM SPOT300


PasandTM SPOT300 is an environment friendly, low-toxicity spotting fluid used for environmentally sensitive offshore and onshore wells. It is a blend of emulsifier, surfactant, surface active agent and wall cake cracking material. It cracks the filter cake allowing it to penetrate, reducing the force required to free the stuck pipe.

Features and Benefits

  • It improves lubricity and reduces contact between the pipe and wall
  • It is compatible with common drilling fluid weighting agents.
  • It may be used in diesel oil, crude or low toxicity oil.
  • It allows quick and effective operation in case of stuck pipe problems.
  • It penetrates and dehydrates the wall cake.

Application

It is used to release differential stuck pipe in an easy and effective manner. It dehydrates wall cake, allowing penetration of the spotting fluid and wetting of the drill string. Also reduces the forces of cohesion between the pipe and cake.

Specifications

Physical State : Blackish brown oily liquid
Specific Gravity : 0.97 – 1.0
Miscibility : Miscible in water and partially in HSD
pH Value : 7 – 8
Flash Point :   More than 140°C
Toxicity : Non-Toxic


 

Packing

PasandTM SPOT300 is packaged in 200 litre or 208 litre HDPE drums. Private labelling and customised packing is also available on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.